Flex grouts
CERESIT CE 43
Flex Grout for Demanding Tiling Areas
Mechanical and water-resistant grout mortar for joints of 1 to 20 mm width, suitable for heated floors and balconies. Perfect for high-traffic areas and wide joints.
-
For indoor and outdoor use
-
For wide joints up to 20 mm
-
For walls and floors
- Description
- How to Use
- FAQ
CERESIT® CE 43 mortar has increased chemical and mechanical resistance and is therefore ideal for grouting ceramics on balconies, terraces and heated floors. Thanks to CE 43's hydrophobic properties (aquastatic effect) water drops remain in the shape of pearls on the surface without penetrating into the structure. Perfect choice for wide joints.Available pack size: 25 kg.
-
For indoor and outdoor use
-
For wide joints up to 20 mm
-
For walls and floors
-
For use on underfloor heating
-
For substrates with high mechanical loading
-
For ceramic tiles and stone tiles
Tile edges shall be cleaned of any stains. Grouting can start after the tile adhesive has hardened and dried. Prior to application, make sure that CERESIT CE 43 does not leave permanent marks on the tile surface. Clean tile edges shall be rinsed with a wet sponge.
CERESIT CE 43 should be poured into a precisely measured amount of clean, cool water and stirred until it forms a homogeneous mixture, free of lumps. Neither rusty containers nor tools can be used. Wait 3 minutes and stir the material again. Depending on the amount of added water, the consistency achieved is suitable for grouting either floor or wall tiles or masonry.
Mortar with plastic consistency should be filled in the joints with a rubber trowel. After initial drying, tiles should be cleaned with a frequently rinsed and wrung out porous sponge. When joints dry too fast, they should be made slightly wet with a wet smooth sponge. Dry grout deposits can be removed using a dry cloth.
CERESIT CE 43 is used for filling joints in gres, ceramic, glass and stone tiles (with exception of natural stone and marble that are sensitive to discolouration), on vertical and horizontal surfaces.
The grout is suitable for indoor and outdoor applications. It is particularly recommendable for installing tiles on deformable substrates: heated floors, chipboards and plasterboards, terraces, balconies.
Fresh joints should be protected against rain, dew and temperature drops to below +5°C until joints are completely hardened and dry.
Our Eco Buckets are made of polypropylene and can be recycled.
We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.